AUTO SERVICE
Brake Repair in Rock Hill, SC — Pads, Rotors & Honest Inspections
Brake pads, rotors, calipers, and brake-fluid flushes at Tire Brothers in Rock Hill, SC. Walk-ins welcome. Most jobs are same-day. Cash only.
Brakes are the one repair you don't put off. The good news: most brake jobs are dramatically simpler — and cheaper — than people expect. Here's what brake service at Tire Brothers actually looks like.
Warning signs you need brakes now
•
Squealing. Built-in wear indicators are scraping the rotor — pads are at the end of life.
•
Grinding. Pads are worn through. You're now grinding metal-on-metal and ruining the rotor. Stop driving and call.
•
Soft or sinking pedal. Often a brake-fluid leak or a failing master cylinder. Safety issue.
•
Pulling to one side under braking. Stuck caliper or uneven pad wear.
•
Vibration through the pedal or steering wheel. Warped rotors. Often resolved by resurfacing or replacing rotors.
•
Brake warning light on the dash. Could be low fluid, low pads, or an ABS sensor — get it scanned.
What we replace, and what it costs
Real Rock Hill ranges as of 2026, parts and labor included:
•
Front brake pads only — typically $120–$180 installed, depending on vehicle.
•
Front pads + rotors — typically $250–$400 per axle.
•
Rear pads + rotors — typically $230–$380 per axle. Rear discs only — drum-brake jobs vary.
•
Caliper replacement — typically $150–$300 per corner depending on the part.
•
Brake-fluid flush — typically $90–$120. Manufacturers recommend every 2–3 years.
We give a written estimate before any work starts. If we find an issue mid-job (a stuck caliper, a leaking line), we call you before adding anything.
What "a brake job" actually includes here
•
Full visual inspection of pads, rotors, calipers, hoses, and brake fluid.
•
New pads with shims and hardware (no reusing old, rusted clips).
•
Cleaned and lubricated slide pins.
•
Rotor measurement; resurface or replace as needed.
•
Bedding-in procedure on a road test before you leave.
How long it takes
Most pad-and-rotor jobs are 1–2 hours per axle. Walk in or call ahead — for a same-day brake job we recommend calling before 2 PM.
What we don't do
We don't do brake-line fabrication, ABS module reflashing, or complex hydraulic-system rebuilds. If your job needs that, we'll tell you up front and point you to a dealer.
Service area
Rock Hill, Fort Mill, Tega Cay, York, Clover, and the rest of York County, SC.
Ready to roll into Tire Brothers?
Walk-ins welcome at 1010 E White St, Rock Hill, SC. Call ahead and we'll have everything ready.